Shanghai Bojin Business Development Co., Ltd.
Main products:Cassette Fan Coil Unit,Ceiling Total Heat Exchanger,Wall-Mounted Total Heat Exchanger,Air Outlet,Thermoelectric
Contact Us
  • Contact Person : Mr. zheng Eric
  • Company Name : Shanghai Bojin Business Development Co., Ltd.
  • Tel : 86-21-66300461-8008
  • Fax : 86-21-66300461-8007
  • Address : Shanghai,Shanghai,RoomB103, No.1 Block, No.695 Lingshi RD, Shanghai
  • Country/Region : China

Floor-mounted Fan Coil Unit

Floor-mounted Fan Coil Unit
Product Detailed
Floor-mounted Fan Coil Unit Compact, lightweight design conserves space Field-flexible design for easy

Ceiling  Fan Coil Unit

Special Features:

1.CoilsStandard and optional high capacity cooling coils are available with manual air vents for all unit sizes. Optional water heating and steam coils are available for 4-pipe systems. Field installedautomatic air vents are optional for water cooling coils.Coils are constructed of seamless copper tubes with headers and aluminum fins. Full depth collars, drawn in the fin stock, provide accurate control of fin spacing and completely coverthe copper tubes to lengthen coil life. Tubes are mechanically expanded into the fins for a permanent primary to secondary surface bond, assuring maximum heat transfer efficiency.The vertical position of the coil assures rapid condensate drainage to provide even airflow and full rated capacity at all conditions.

2.MotorsTap wound, three-speed, permanent split capacitor motors are standard for TSH and TSC units. Motors have sleeve bearings with oilers, inherent thermal overload protection and automaticreset. Motors are resiliently mounted to assure quiet, vibrationfree operation and are easily removed.

3.Fan WheelsAll fan wheels are forward curved, double width, double inlet, centrifugal type and are statically and dynamically balanced for smooth, quiet operation.Fan HousingsSplit design fan housings allow quick service of fans and motors.

4.Fan DeckHeavy-gauge continuous galvanized steel rigidly supports motors, fan assembly, and fan housings as a single unit. The fan deck is self-locking to the basic chassis and is easily removedfor service.

5.Casing and CabinetAll units are constructed of heavy gauge steel for long life and durability. TSC units and optional trim flange ceiling frames are finished with an electrostatically applied, baked-on Antique Ivorypaint.

6.Single Power LocationAll electrical components of the TSH and TSC units are factory wired to an electric raceway accessible from the bottom of the unit. All field wiring connections can be made at the electricalraceway. Electric heaters, depending on amperage, may require more than one field circuit, all of which can be brought to the raceway.

7.Speed ControllerA three-speed switch with off position is available for all sizes.The speed switch must be field mounted in a 2 x 4 x 21⁄2" deep electrical box by others.Controls SystemsA wide variety of two- and four-pipe control systems are available with wall mounted thermostats or combination thermostat/ speed switches (see page 10).

8.Drain PansThe galvanized steel drain pan with copper connection is insulated on the external surface with fire rated closed cell foam.The drain pan extends under the entire coil and coil connections. An optional galvanized steel secondary drain pan provides complete condensate drainage from valve package components.

9.FilterTSC units have as standard a 1" throwaway filter. The filter is easily removable through the bottom access panel. 

Floor-mounted Fan Coil Unit

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.